Conoco Phillips Office Building

Location: Farmington

Owner: Conoco Phillips

Completion Date: December 2011

New two-story office building

Farmington | Jaynes Corp | Office & Lab

The ConocoPhillips project consists of a new 25,884 square foot two story office building added to the existing ConocoPhillips campus. The building sits on 47EA auger cast piles and ties into a cast in place foundation system consisting of pile caps, grade beams, and stem walls. The main structure consists of structural steel columns, beams and joists. There is a slab on metal deck on the 2nd floor and roof. The exterior consists of structural metal studs, exterior sheathing, and EIFS. There is an elevator and interior stairway for access to the 2nd floor offices. There is also an interior 3 story stairway on the south side of the bldg that will serve as the main entrance for most of the Conoco Phillips employees working in the bldg that will access the 1st floor, 2nd floor, and roof levels. There are 2EA main 4000cfm rooftop units that serve the 1st and second floors of this office bldg. There are 12 terminal units per floor to aide in the temperature control for each floor. There is a boiler in a penthouse on the roof that supports the terminal units on the 1st and 2nd floors.

The interior finishes consist of mainly carpet on the floors and painted walls with each room having one wall accented. There are cork wall coverings around the walls of the main office bank on the first and second floors for ease of communication between the Conoco Phillips teams. The addition adds 3 needed conference rooms to the Conoco Phillips campus. The head end of the fire alarm system for the campus will be located in the new addition. Each floor is designed with break rooms, restrooms, and adequate power and data outlets to serve the occupants of the building and field workers needing to connect into the Conoco Phillips IT systems. There is a walkway that will allow employees to freely move from the new addition to an existing building within the Conoco Phillips campus. The building has been designed to meet the needs of the Conoco Phillips team and will be very appealing from the exterior. Safety considerations have been factored into the design and permanent tie-off points will be available during construction and after construction for maintenance use.